Card and Present for a Centenarian

On Saturday we are going to a party to celebrate a friend’s 100th birthday. She is a truly remarkable lady and you’d never guess she was this old! She gets out and about and joins in everything, and is a real character. I really wanted to make her something special for her birthday but didn’t have much time to do it, so this week I’ve pulled out all the stops and really cracked on, and at last I’ve finished, bar a few finishing touches.

The Card

In February I went to the Craft4Crafters craft show in Exeter, and bought some lovely dies by Die’sire (Crafters’ Companion) – these are supposed to be to create easel cards but I thought this lady might not know how to work them, so I decided on doing a straightforward card for her, using most of the elements. I chose the gorgeous butterfly card set.

Here is the topper in the early stages. I forgot to photograph every stage, but I chose some paper and card from a wonderful collection that a friend gave me for my birthday – she was so delighted that I was already starting to use them. The base layer is a dull gold card with bright gold text, “Congratulations” all over it. I chose a piece of green and white floral card for the next mat layer, and on top of this, a decorative paper with pink roses on a green and white background. These two mat layers were cut with the two frame dies from the set, and I distressed the edges of the top layer with distress inks and a bit of water spattering.

Here’s a more detailed shot. Originally I was going to use one or both of the wide ribbons in the previous photo but on further consideration, thought they were a bit too wide, so I chose a narrow pink organza ribbon, and a slightly narrower green satin one with a picot edge instead. I also selected a few flowers left over from the Floral Mini-Album project, which would tone in nicely with this card.

I selected some sentiment pieces from my stash, which I had cut some time ago on Sheba, my Cougar cutting machine. I coloured the text pieces with Worn Lipstick Distress Stain, and the shadow pieces I first coloured with Dried Marigold Distress Stain to give a nice rich base colour, and then added Treasure Gold gilding wax.

I layered the pieces, sticking them together with spray adhesive. Behind, you can see my home made spraying booth.

Turning to the inside of the card, I coloured it very lightly, using Inkylicious Ink Dusters and Distress Inks, first working in from the edge with Evergreen Bough, and then covering the whole of the middle with Antique Linen. After this, I stamped a selection of butterflies with Versamark and heat-embossed them with clear embossing powder. I then continued to colour the paper, first with Old Paper Distress Ink, and then a little Spun Sugar, concentrating on the areas where the embossed butterflies were. I rubbed these with very slightly damp kitchen paper to remove any ink from the embossing, and added some water spatters which I allowed to sit for a minute or two before blotting them off. The final touch was to add a bit more distressing around the edges, this time with Bundled Sage Distress Ink and a home-made ink blender.

The result is quite subtle, I think, and the embossed butterflies echo the theme of the card.

Here is a mock-up of the front of the card with all the elements laid in place.

The two little leaves were from my stash. Every now and then I cut a whole sheet of different elements on Sheba, from white card, and store them away, ready for when I need them, and I can colour them individually according to the project. This time I used Bundled Sage Distress Stain.

To add a bit of interest, I daubed a little Forest Moss Distress Stain onto my craft sheet and with a very fine wet brush, added a deeper colour to pick out the veins of the leaves. I spritzed them lightly with water and blotted them to soften the effect a little, and then dried the leaves with my heat gun. They were stuck down with Scotch Quick Dry adhesive.

Here is the finished card with the final elements added. I left it out overnight to allow the glue etc. to dry.

Before attaching the topper to the base, I attached the two layers of ribbon, fixing them on the back of the gold “Congratulations” card with double sided tape, and attaching a small piece of each, folded over to form two tails, with glue dots. The top of this was covered with the paper flowers, which were attached with hot glue. The leaves were stuck down with Scotch Quick Dry Adhesive.

The butterflies in the die set all have the ability to have their wings folded upwards, and whenever I do this, I always add a blob of Pinflair glue gel under each wing to keep them up and stop them getting flattened. This glue dries crystal clear and you really don’t see it. It also doesn’t lose any dimension as it dries, making it ideal for uses such as this. It is a very three-dimensional glue.

I added a few dots of Holly Stickles down the bodies of the butterflies, and in the centre of the smaller pink flower. Both the Pinflair and the Stickles glitter glue need time to dry before they can be handled. Unfortunately the Stickles dry a lot flatter than they appear when first applied, which I think is a shame because I love the 3-D effect you get with them when they are wet.

I stuck down the sentiment on the front of the card and inside, using Scotch Quick Dry Adhesive.

Now all that remains is to cover a box that I’ve got, which will serve as an envelope – the whole thing is rather thick, with the roses and the raised butterflies’ wings.

The Present

A small cross-stitch plaque with the word “Shalom” in Hebrew and English letters. The tall stroke of the Hebrew letter “lamed” extends to become the English “L”. I worked this cross-stitch with two strands of stranded cotton on 22-count Aida fabric, working in the small clip-frame which has a hanger on the top.

Beside it you can see the original one which I made for myself.

When this photo had been taken, I had completed the cross stitch but had not yet done the outlining back stitch in black, using a single strand of stranded cotton. This really helps the design stand out against the background, as you will see if you compare the two plaques.

I created the original design on a programme called EasyCross, several years ago. Unfortunately this software does not work fully with Windows 10. I was able to print out the design (top right in the above photo) but the colours weren’t right, and it was covered with very distracting diagonal dotted lines. I ended up colouring the background with coloured pencils to show me where to change. Before I did this, I found I was making numerous mistakes, and the bottom half of the design had to be fudged a bit but it’s worked out OK. The graduations between the rainbow colours were achieved by mixing threads on the needle – one strand of each colour. In the original, I worked alternate stitches of each colour for the transition, and I can’t decide which I prefer.

I have bought a new cross-stitch designing programme called WinStitch (there is also an Apple version called MacStitch). Unfortunately the old EasyCross files won’t open in this programme but at least I can print out my original designs and copy them into the new programme. This will take a long time but it will be nice to have them available again. I haven’t done any of this for such a long time and now feel I want to take it up again, and I was very pleased to find that an alternative programme exists to replace the now defunct EasyCross. A shame this programme has been discontinued because it was very good indeed.

Here is the completed plaque.

This is the reverse.

To finish off the back, I trimmed back the edges of the embroidery fabric and glued it to the inner ring of the frame with tacky glue, leaving it to dry for a while, held in place by a series of plastic clamps that I’ve got.

I stuck some cream polycotton fabric onto a piece of self-adhesive pelmet Vylene and used the inner ring of the frame as a template to make a paper pattern to cut it out. Unfortunately I had to cut this by hand and it’s a bit shaky round the edges! I think what I need to do is to scan the inner ring, and use this image to create a template in Inkscape, which I can cut on the cutting machine, which would give a much neater result.

To neaten it a bit, I ran some tacky glue around the junction between the two frames and stuck on some gold Lurex crochet thread, finishing it off with a small bow that I made on my bow maker. This was stuck down with a tiny blob of Pinflair gel adhesive, and again, this was left to dry overnight. I have also signed the back and dated it.

I am busy tomorrow morning, but I have every hope that I shall finish off this whole project in the afternoon, and get it wrapped ready for the birthday party the following day.

Card Factory 2015–Purple Embossed Birthday Card with Tag

I have started my latest card factory. My stash is empty, and I am fed up with realising it’s someone’s birthday in a few days’ time, or someone needs a get well card or whatever, and having to work to a deadline. I thought if I could make up a good collection of cards I’d always have something ready when I need it. Most of them will be relatively simple.

My first effort is as a result of the pieces I cut before, to make finished cards 5 inches square. I embossed a whole sheet in error and didn’t use it, so that is my starting point for this card.

The first step was to ink the embossed piece of white card. The embossing was done with my Cuttlebug, using Tim Holtz’ “Damask” embossing folder, and I inked it with Shaded Lilac distress ink, using an Inkylicious Ink Duster.

Next I heat-embossed the raised surface with clear embossing powder, applying the Versamark with my brayer.

I inked the piece again, this time with Seedless Preserves distress ink, using the Inkylicious Ink Duster, and went around the edges with Dusty Concord distress ink, using a home-made blending tool. I rubbed the ink off the embossing resist using the purple kitchen paper, very slightly dampened.

Now it was time to start on the tag holder, to be stuck down to the bottom part of the card. I took a piece of scrap white card, an offcut from when I was cutting the blank 5 x 5 in cards, and trimmed it to size.

I took the piece of kitchen paper which I’d been using to mop up purple ink, and which had matured to the state when it was usable for backgrounds etc. I separated the two layers of kitchen paper (you get double for your money that way!!) and cut one piece in half. I laid down a fairly thick layer of regular matt gel medium onto the piece of card, and scrumpled up the piece of kitchen paper as I laid it down on top. I added more gel medium to the top surface, making sure it was well stuck down.

I dried it a bit with my heat gun and when it was ready to be handled, I trimmed off the excess with scissors, and then dried it fully.

I inked around the edges and on the surface, by rubbing the Seedless Preserves distress ink pad directly onto the surfaces, and then blended in the ink with the Inkylicious Ink Duster, to cover up any white, and any gel medium that was showing. I dried it again with my heat gun.

The final step was to rub on some Treasure Gold gilding wax lightly with my fingertip to highlight the raised surface of the piece. It has a lovely deep texture and a lot of lustre.

I cut a tag using my new Tim Holtz “Labels” die set, using some of the purple paper that I’d stuck down onto card, for my recent purple projects for our neighbour.

I inked the back of the tag with Seedless Preserves distress ink, using the Inkylicious Ink Duster, and the edges with Dusty Concord distress ink, using the home-made ink blender. I flicked water onto it with the tube from my water spritzing bottle, left it to stand for a minute or two and blotted it off.

I felt that the edge of the tag holder needed something to give it more definition against the card background, so I took a scrap of recycled cream gold-edged ribbon from my stash, and cut it to length, and then cut it in half lengthwise. I think this ribbon came off an Easter egg! I never throw anything like this away – it all goes in my stash.

I used the extra-sticky red-backed double sided tape to stick it around the edge of the tag holder. Tip: to store these rolls of tape, whose edges get extremely sticky and make the rolls stick together, I always separate them with a square of waxed paper.

The gold-edged ribbon in place along the top edge of the tag holder.

To neaten the back, I stuck down a strip of card to cover the frayed edge of the cut ribbon.

The tag holder glued in place onto the card. I used Scotch Quick-Dry Adhesive which is a good strong wet glue. I slipped the tag behind the holder to show how it would go.

Next the matting and layering of the card. I inked the edges of the card base with Shaded Lilac distress ink and the Inkylicious Ink Duster, and then matted the card with gold mirror card and two shades of purple cardstock.

Stamping the inside of the card. I used a “Happy Birthday” sentiment stamp from the Stamp Barn (No. CHSH 238E), using Dusty Concord distress ink, after I had lightly inked around the edges of the inside of the card with Shaded Lilac distress ink and the Inkylicious Ink Duster.

To stamp the sentiment on the tag, I heat-embossed in gold, using the “Birthday Greetings” sentiment from my Stampin’ Up set “Wetlands.”

The completed tag. I added some purple ribbon and some fancy yarns with a touch of told in them.

The completed card, with the tag in place.

This card was slightly more complicated to make than most of the others I am planning on making in the Card Factory, but I wanted to use the embossed sheet I had, and I already had all my purple stuff still out!

Purple Basket

Yesterday I made a little basket to put all the purple goodies in to give to our neighbour. I found the instructions for making this basket via Pinterest, which directed me to this blog. I decided to alter it somewhat – making it twice as large (a 12 x 12 in sheet rather than 6 x 6 in, and even so, it comes out quite small) and also to make a single handle rather than the two in this design. I am grateful to Rachel Ricks for her template.

Here is my piece of purple 12 x 12 card, scored and cut as per the instructions.

I cut several strips and panels to embellish the outside of the box. I made a bit of a booboo over this (more later) because I didn’t fully visualise how it was going to work!

I began by embossing these panels, using one of Tim Holtz’s embossing folders, “Damask,” and my Cuttlebug.

After this, I inked the raised embossing with Seedless Preserves distress ink, using my brayer.

I wasn’t happy with the result as the background was too pale, so I inked it with Dusty Concord distress ink, which looked a lot better. I did most of the inking on this project using Inkylicious Ink Dusters.

Turning to what would be the inside of the box, I thought the plain purple card was far too boring, so I smooshed a background using Dusty Concord and Seedless Preserves distress inks, rubbing the ink pads on my craft sheet and spritzing it with water.

I felt it needed something extra so I decided to put my new Brushos to use, and sprinkled on some purple, and spritzed it with water. I am not sure whether this was a component part of the purple or whether the crystals had got contaminated with another colour, but some little gold flecks appeared which I really liked! Unfortunately the photo doesn’t do this justice – it looks really rich in real life.

This is a set of butterfly stamps I got a few months ago.

I heat-embossed these on the inside of the basket, using gold embossing powder.

Returning to the panels for the outside, I heat-embossed the raised embossed surface of the panels, applying Versamark with my brayer and embossing with clear embossing powder.

After this I added more Seedless Preserves distress ink to darken the background still further.

The final touch was to add some Treasure Gold gilding wax very sparingly over the embossed surface. Just the effect I was after!

It was at this point that I realised that I had not made any panels for the ends of the basket. I tried to remember what I had done, and they didn’t look the same at all! What I should have done was to look at the photos I’d already taken but I didn’t think of that… chemo brain… Anyway, I quite liked the result even if the panels did come out lighter than the rest – let’s call it “contrast” lol!!

I also realised that I should have cut the strips into short lengths to cover only the cut strips of the template, and not to have a piece going across what turned out to be the ends of the basket, so I cut off the embossed parts and disposed of the middle part. I stuck them down with my ATG glue gun. I had cut them 1/8 in smaller all round (apart from where they joined the fold) to give a matted appearance. The pale square in the centre is the bottom of the outside of the basket.

The next step was to assemble the box. If you look at Rachel Ricks’ blog you can see how it all comes together.

I glued the strips to each other in turn, and to the triangular flap underneath, trimming off the excess to give a nice neat edge.

Here is the basket being assembled. I used Scotch Quick Dry Adhesive which is a good strong wet glue. When I make this project in the future, I shall use this to attach the panels too, because as I flexed the strips to assemble the box, some of them started to come away at the edges and I had to squirt some of the adhesive between the layers to secure them.

I punched two pairs of circles to cover the join where the strips all came together, and also to cover the backs of the brads to attach the handle.

The larger circles were cut with a 2 1/2 in scalloped circle punch and the smaller ones with a plain 2 in circle punch. I embossed and inked these as before.

I folded each circle in half before sticking them together, and then stuck half the circle to the outside of the basket on each side.

To make the handle, because my Cuttlebug embossing folders are not long enough, I placed the narrower (1 in wide, 11 3/4 in long) strip onto the opened embossing folder and hand embossed it with a ball embossing tool. I could probably have folded it in half and embossed it in the normal way because the fold wouldn’t have shown once it was stuck down to to the other piece, or embossed each end in turn, but it looks OK. This narrower strip was cut from the same pale mauve cardstock that I used for the panels.

The wider piece was 1 1/4 in wide and 12 in long, cut from the same purple cardstock as the basket. I rounded all the corners with a corner rounder punch and stuck the two layers together with Scotch Quick Dry Adhesive, curving the handle as I went, so that the two layers would stick together in the correct curve without any separation or buckling. I chose two decorative brads to attach the handle to the basket.

I made a hole on each side through the half circle and all the layers, and discovered that it was much too thick for the brad to go through and its ends be spread apart to attach it. I therefore got my craft knife and carefully trimmed away some of the layers until I was satisfied that the brad could be attached securely.

Once this was done, I threaded the brads through the ends of the handle and attached the handle to the basket. The final step was to fold down the other half circles and glue them in place, hiding the trimmed away layers and the brad backs.

This finished the basket apart from a few little embellishments to go on the handle.

I punched three butterflies with my Stampin’ Up butterfly punch from some of the altered purple paper stuck to a layer of card, and chose the Tim Holtz Bitty Grunge set of background stamps to heat emboss them in gold.

Here are the completed butterflies. I had inked them on the backs with Dusty Concord and Seedless Preserves distress inks, rubbing the butterflies directly across the ink pads.

I made a bow from purple ribbon, using my bow maker, and stuck this to a cream and gold bow I already had in my stash. The final touch was to add a little “made with love” heart charm in gold. All the embellishments were attached to the handle of the basket with Pinflair gel glue and left to dry overnight.

Here is a detail of the embellishments.

The completed basket with the gifts inside.

Today I made the lavender bag to go in the little box, and picked some lavender from the garden to make a nice little spray to go in the basket. I was hoping to make a small notebook with some of the purple paper I have left, but unfortunately there was no time.

 

 

 

 

 

 

 

 

 

 

 

This afternoon we went across to see our neighbour and she absolutely loved her little basket full of goodies – she said her favourite colour was purple and she loves butterflies – both of which I knew! So nice to hit the spot and shed a little happiness – she’s had some hard knocks recently.

I am delighted that this little basket is just large enough to take the square card I made, and the other bits and pieces too. It makes a nice presentation of a collection of small gifts, and it’s definitely a project I shall be doing again. Thank you again, Rachel, for your lovely design. I hope you approve of what I have done with it!